Experienced Technicians of All Trades: Multitech Marine Services

Employer: MULTITECH MARINE SERVICES

Email Address: Louie.Desmarais@multitechmarine.net

Position Title: EXPERIENCED TECHNICIANS OF ALL TRADES

Compensation/Rate: BASE ON EXPERIENCE

Job Description: MULTITECH MARINE SERVICES is a Factory & Warranty Service Center for many French Made Catamarans such as Lagoon & Fountain Pajot. We do everything from insurance repairs, to full or partial refits & everything in between.

We are currently looking for experience technicians of all trades such as: Carpentry, Rigging, Electrical, Marine Systems & Engine work. 

We are located in Lauderdale Marine Center which is the largest dedicated yacht repair and refit facility in the Continental U.S with access to 485, 220, 100, 75-ton & 145-ton Catamaran lifts 

We lease our own docks from Lauderdale Marine Center in Riverbend which allows us to manage all of our on going projects in one place.

Marine Mechanic: Safe Harbor Hawthorne Cove

Employer: Safe Harbor Hawthorne Cove

Email Address: hashton@shmarinas.com

Position Title: Marine Mechanic

Compensation/Rate: based on experience

Job Description: Technician (Mechanic)

Position Summary

Technicians inspect, maintain, and repair boats of all kinds. Using diagnostic equipment, test and repair boat engines, hulls, propellers, rigging, masts, sails, and navigational equipment. They also install and test sanitation and refrigeration systems, cabinetry, electrical systems, steering gear, and accessories.

Essential Duties and Responsibilities

• Inspect, maintain, and repair boats of all kinds

• Utilize diagnostic equipment to test and repair boat engines, hulls, propellers, rigging, masts, sails, and navigational equipment

• Install and test sanitation and refrigeration systems, cabinetry, electrical systems, steering gear, and accessories

• Troubleshoot, test, repair, replace, remove and install vessel systems and components

• Conduct thorough assessment prior to starting a job including; acknowledging the budgeted time and time frame for completion, proving the system and the element requiring service, sourcing parts if required

• Overall knowledge of marine systems including electrical, plumbing & water systems

• Troubleshoot, repair, and install vessel systems and components including but not limited to: electrical, electronics, HVAC, plumbing & water systems (fresh, salt, and waste), gas and diesel engines

• Assign parts and purchases to the appropriate vessels/tickets

• Must possess own tools

• Availability to work overtime in order to meet deadlines

Technical and Physical Requirements

• High school diploma or equivalent preferred

• Technical school training preferred

• 5 years’ experience preferred

• ABYC and/or manufacturer certifications preferred

• Ability to ascend and descend a ladder

• Must carry own tools

• Ability to work in confined spaces

• Ability to lift 50 pounds

• Basic boat handling skills preferred

• Experience with both gas and diesel engines preferred

Minimum Soft Skills Qualifications

• Excellent verbal and written communication skills

• Positive attitude and willingness to learn

• Ability to provide exceptional customer service and an understanding of customers’ needs

• Excellent interpersonal and collaborative skills while working both independently and within a team context

• Organizational skills are a must

• Demonstrates ability to prioritize and work unsupervised

• Eager to engage in a growing, fast paced, and industry-leading company

The Company

Safe Harbor Marinas, LLC (SHM) is the largest owner and operator of marinas in the world. As a fast-growing private equity sponsored company, SHM cultivates a team dynamic of passionate individuals led by the sharpest minds in the industry in order to serve the vibrant boating community that encompasses the SHM network. SHM offers professional education and training opportunities and the chance to work with – and learn from – highly experienced marina professionals. In addition, SHM offers eligible employees healthcare benefits, 401(k) plans, paid time off, and relocation opportunities.

Safe Harbor Marinas provides equal employment opportunities (EEO) to all employees and applications for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Safe Harbor complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. The policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

HOW TO APPLY
Apply via Indeed: https://employers.indeed.com/j#jobs/view?id=484f1cb6f853
Email resume and cover letter to: Prussell@shmarinas.com

Marine Technician: Princess Yachts America

Employer: Princess Yachts America

Email Address: tmenninger@pyamerica.com

Position Title: Marine Technician

Compensation/Rate: 40,000 - 60,000

Job Description: 

Princess Yachts of America is looking for yacht technicians to join our rapidly growing service and commissioning departments. We need technicians for our New Gretna, NJ location, but are expected to be able to travel to other areas to service our yachts.

This is an exciting opportunity to join an industry leader.

Qualifications:

ABYC and NMMA certificates a plus, but not required.

A good understanding of ac/dc electrical, electronics, yacht systems, pumps, hydraulics, and air con systems is desired.

Princess offers an extensive benefit plan, 401K, PTO, paid training and continuing education. If you are coming out of school, or have been working on yachts for years, there is an opportunity for you to make a career with one of the best distributors in the world.

Marine Carpenter: Weaver Boatworks Inc.

Employer: Weaver Boatworks Inc.

Email Address: crystal@weaverboatworks.com

Position Title: Marine Carpenter

Compensation/Rate: Negotiable

Job Description: Weaver Boatworks located in Tracys Landing, MD is a very fast paced boat manufacture looking to expand our team. We have several boats being built between two locations and more boats on order and are looking for marine carpenters with experience in the marine field to join our team.

Email crystal@weaverboatworks.com 

or

Call office for more info. 410-867-8757.

Production and Design Drafting: Insetta Boatworks

Employer: Insetta Boatworks

Email Address: joel@insetta.com

Position Title: Production and Design Drafting

Compensation/Rate: $20/hr. 

Job Description: 

Part time drafting and design work. Remote working is fine.

We build state of the art high performance offshore fishing catamarans. This position will offer support in drafting and design for production. Creating construction drawings, updating 3D models, design of new components and structures. Renderings.

Required experience: Strong experience in Rhino, general knowledge of boats at the very minimum

Desired Experience: Knowledge of boat mechanical and electrical systems. Composite construction and design. Resin infusion, mold/tooling design, hydrofoil.

Contact Joel Shine - Joel@insetta.com

Cabinetmaker Apprentice: New England Finish Systems

Employer: New England Finish Systems

Email Address: fhertel@nefinish.com

Position Title: Cabinetmaker Apprentice

Compensation/Rate: Based on experience. 

Job Description: 

Cabinetmakers and Cabinetmaker
Apprentices wanted.

New England Finish Systems was established 1985 as a premier Union company providing drywall and other union services to the Boston market.
Our clients asked us to expand into millwork and since the last two years we are also providing millwork products and services to the Boston Union market.
We are actively seeking:
• Cabinetmaker Apprentices. (L1-L3)
• Skilled Cabinetmakers.
We are Union shop and provide Union benefits with competitive wages.
There are several areas of personal growth and advancement. We build a significant amount of custom assemblies and enjoy building a high end commercial millwork. Our shop is air conditioned and well lit, we are proud to provide an excellent work environment.
We have a young agile team that is guided by very seasoned professionals, so there is plenty of opportunity to learn and grow.
Reach out to: Don Desmarais – cell: 603-327-1110
Email: ddesmarais@nefinish.com
or: Frank Hertel – cell: 603-212-6432
email: fhertel@nefinish.com
or just come visit us: 32 Hampshire Rd, Salem, NH 03079 – entrance on the Garabedian Dr. side.
See you soon!
Don & Frank
P.S. We also pride ourselves on a very solid COVID-19 protocol to keep everybody safe

Composite Technicians/Boat Builders: Chislett's Boating and Design LLC

Employer: Chislett's Boating and Design LLC

Email Address: cchislett@chislettsboating.com

Position Title: Composite Technicians/Boat Builders

Compensation/Rate: Based on experience. 

Job Description: 

We specialize in composites manufacturing using vacuum infusion. We are seeking individuals to join our team of skilled Composites Technicians. We manufacture Maritime Boats, Noreast Boats as well as US Navy boats from 14' to 35'. 

We are located in tax free Dover New Hampshire. If interested, contact Cameron Chislett for further info on the positions.

(603) 605-1023 ext.103

Office Coordinator: The Landing School

Employer: The Landing School

Email Address: sdevlin@landingschool.edu

Position Title: Office Coordinator

Compensation/Rate: $15-$18/hr 

Job Description: 

Small, internationally acclaimed marine trade school looking for a self-starter to support executive staff and manage overall office tasks. Individual must have a willingness to cross-train in multiple job areas, have an ability to multi-task and be organized, and have strong attention to details and deadlines. Background in education and an interest in the boating industry are a strong plus. Full time, permanent position, including benefits.

Required education/experience: 
• Ability to work in fast-paced multidisciplinary environment
• High school diploma
• Google Docs 
• Microsoft Office 
• Adobe Creative Suite
• List/Data Management
• Exceptional telephone/communications skills
• Occasional ability to lift up to 30 pounds

Preferred Experience/Interest:
• PC over Apple
• Potential growth in sales support
• Social Media

CAD Yacht Designer: Belkov Yacht Company

Employer: Belkov Yacht Company

Email Address: tcorelitz@belkovyacht.com

Position Title: CAD Yacht Designer

Compensation/Rate: Negotiable 

Job Description: 

Position:            Yacht design CAD department position in progressive, high end, custom yacht interior design/build company located in Annapolis, Maryland.  

We supply yacht builders, primarily on the east coast, with 3D modeled, CNC cut, and custom built interior joinerwork, super structure design and engineering. We 3D design in Rhino 6.0.

• 3D modeling and drawing generation
• Client, management, and shop floor interaction
• Project information management
• Office 365, Microsoft Teams

Marine Systems Instructor: The Landing School

Employer: The Landing School 

Email Address: careers@landingschool.edu

Position Title: Marine Systems Instructor

Compensation/Rate: Commensurate with Experience 

Job Description: 

Position:            This position is an Instructor in the Marine Systems Program at the Landing School.  It is a full-time, permanent position functioning within the direct supervision of the Dean of Education, hired by the President of the School.

Objective:            The Marine Systems program teaches the skills and knowledge necessary to install, maintain and repair today’s increasingly complex boat systems using established industry standards. The curriculum also serves as an effective preparation for those students seeking American Boat and Yacht Council (ABYC) marine systems certification.

Duties and Responsibilities: In fulfillment of the objectives, the  Marine Systems Instructor will:

• Continue to develop and improve of the curriculum through syllabus, lesson plans, teaching equipment/materials, and scheduling of student work

• Work directly with students, with primary  responsibility for lectures, demonstrations, bench work, practice applications, and yacht quality installations and repairs of marine systems in customer boats

• Assist students in learning individually, in small groups and as a class through clear communication; patient, understanding, approach; thorough and professional knowledge; mature leadership; and positive, honest academic advice

• Evaluate student learning through questioning, homework, practical and theoretical testing, and certifying exams

•  Share in the administrative tasks of the development and successful operation of the program, as assigned by the Dean of Education

•  Share responsibility for the management of program facilities and equipment, as assigned by the Dean of Education and Dean of Administration

• Demonstrate, teach, and enforce shop safety requirements and procedures

• Uphold all school policies set forth in the Student Handbook and the School Policy Manual

• Participate in school functions, staff meetings and professional development activities

• Continue to develop skills and knowledge pertinent to teaching and current marine industry practices

• Oversee and manage the activities of the Marine Systems Program Assistant

• Work cooperatively and professionally with the Dean of Education, staff, and students of the School at all times

Qualifications:

• Associates degree or better

• Minimum of four years working in industry, in a boatyard setting, preferably as a manager, involved in all aspects of yacht service and repair

• Practical experience in the installation and maintenance of complex marine systems including: engines and propulsion, AC and DC marine electrical systems, marine plumbing systems, fiberglass and metal yacht structural repair

• Previous teaching experience a plus

• ABYC Certified Technician a strong plus

CAD Draftsperson, Yacht Designer: Morrelli & Melvin Design

Employer: Morrelli & Melvin Design & Engineering, Inc.

Email Address: info@morrellimelvin.com

Position Title: CAD draftsperson, yacht designer

Compensation/Rate: commensurate with experience level

Job Description: Morrelli & Melvin Design & Engineering, Inc. has an opening for a draftsperson for yacht and commercial boat design. Excellent CAD drafting skills and experience with boatbuilding are imperative.

Business Ownership Opportunity: Newcastle Marine

Employer: Newcastle Marine 

Email Address: newcmar1@gmail.com

Position Title: new owner 

Compensation/Rate: to be discussed

Job Description: I am 65 years old and have been in the marine engine/boat business since I was 16 . It is time to phase out so I am looking for a candidate with about 10 years experience , to buy out my very well equipped and prosperous business.I service primarily outboards and stern drives and the occasional boat that comes in here on a hydraulic trailer. Annually I store 40 + boats ,with about 30 going the storage sheds , and the rest shrink wrapped out side Please contact me John Traina at 207 563 5550 or newcmar1@gmail .com

Production Designer: Washburn & Doughty Associates, Inc.

Employer: Washburn & Doughty Associates, Inc.

Email Address: ndriscoll@washburndoughty.com

Position Title: Human Resources Director

Compensation/Rate: $28.00 an hour

Job Description: Position Description
Job Title: Production Designer
Reports To: Naval Architect – Engineering Department
Date: 10/1/2019

Primary Function:
To provide accurate and on time production design drawings that support production work packages for the construction of steel and aluminum vessels. In addition, maintain proper design documentation and associated design revision details. 

Primary Responsibilities:
• Produce sketches, proposals, renderings and accurate finished construction drawings for new construction. 
• Design drawings will include structure, machinery foundations, piping systems, electrical systems, HVAC systems, vessel outfitting. 
• Create detail design drawings and documentation based on customer’s current specifications and relevant regulatory requirements. 
• Lofting and nesting of parts. Produces accurate and precise parts and appropriate nesting of steel plate.
• Monitor and maintain departmental core deliverables while meeting or exceeding required drawing schedules. 
• Professionally interfaces with Production, Purchasing, Management, Customers and outside inspection authorities.
• Assist in the production issues throughout the construction of the ship. 
• All other related tasks as assigned.

Job Requirements:
• Desire 3-5 years of marine design work experience, or other design experience in a technical environment. Consideration may be given to an individual fresh out of an advanced or technical school design program.
• Computer skills: AutoCAD 2-D and Rhino-3D desired. Microsoft Office, Excel
• Analytical skills along with a strong mechanical aptitude.
• Must be comfortable working in both the office and on shop floor as position requires.
• Must have the ability to work within required regulatory code.
• Good interpersonal skills. Ability to work in a team based environment as well as independently.
• Must be able to multitask and prioritize work appropriately.
• Ability to effectively communicate in writing and verbally.
• Ability to work overtime on an as need basis.

Physical Requirements:
• Must be able to work for extended periods at a PC work station.
• May periodically go into the production environment to talk to supervision or to visually verify an arrangement or to take a measurement(not as a routine)

Marine Systems Instructor: The Landing School

Employer: The Landing School 

Email Address: careers@landingschool.edu

Position Title: Marine Systems Instructor

Compensation/Rate: Commensurate with Experience 

Job Description: 

Position:            This position is an Instructor in the Marine Systems Program at the Landing School.  It is a full-time, permanent position functioning within the direct supervision of the Dean of Education, hired by the President of the School.

Objective:            The Marine Systems program teaches the skills and knowledge necessary to install, maintain and repair today’s increasingly complex boat systems using established industry standards. The curriculum also serves as an effective preparation for those students seeking American Boat and Yacht Council (ABYC) marine systems certification.

Duties and Responsibilities: In fulfillment of the objectives, the  Marine Systems Instructor will:

• Continue to develop and improve of the curriculum through syllabus, lesson plans, teaching equipment/materials, and scheduling of student work

• Work directly with students, with primary  responsibility for lectures, demonstrations, bench work, practice applications, and yacht quality installations and repairs of marine systems in customer boats

• Assist students in learning individually, in small groups and as a class through clear communication; patient, understanding, approach; thorough and professional knowledge; mature leadership; and positive, honest academic advice

• Evaluate student learning through questioning, homework, practical and theoretical testing, and certifying exams

•  Share in the administrative tasks of the development and successful operation of the program, as assigned by the Dean of Education

•  Share responsibility for the management of program facilities and equipment, as assigned by the Dean of Education and Dean of Administration

• Demonstrate, teach, and enforce shop safety requirements and procedures

• Uphold all school policies set forth in the Student Handbook and the School Policy Manual

• Participate in school functions, staff meetings and professional development activities

• Continue to develop skills and knowledge pertinent to teaching and current marine industry practices

• Oversee and manage the activities of the Marine Systems Program Assistant

• Work cooperatively and professionally with the Dean of Education, staff, and students of the School at all times

Qualifications:

• Associates degree or better

• Minimum of four years working in industry, in a boatyard setting, preferably as a manager, involved in all aspects of yacht service and repair

• Practical experience in the installation and maintenance of complex marine systems including: engines and propulsion, AC and DC marine electrical systems, marine plumbing systems, fiberglass and metal yacht structural repair

• Previous teaching experience a plus

• ABYC Certified Technician a strong plus

Yacht Design Instructor: The Landing School

Employer: The Landing School

Email Address: seanfawcett@landingschool.edu

Position Title: Yacht Design Instructor

Compensation/Rate: Salary, based on experience 

Position:            This is a full-time, permanent position under the direct supervision of the Dean of Education, hired by the President of the School.

Objective:            The Yacht Design curriculum is designed to provide students with a structured learning environment in which they can become knowledgeable and proficient in the practical application of the fundamental principles of small craft naval architecture, design, strength, construction and systems and develop the skills to communicate effectively with other industry professionals by verbal, written and graphical means.

Duties and Responsibilities:              

In fulfillment of the objectives, the Yacht Design Instructor will:

• Work directly with students, with primary responsibility for lectures, demonstrations and studio design work.

• Assist students in learning individually, in small groups and as a class through clear communication; patient, understanding, approach; thorough and professional knowledge; mature leadership; and positive, honest academic advice

• Evaluate student learning through questioning, homework, and practical and theoretical testing.

• Continue to develop and improve the curriculum and all teaching materials

• Share in the administrative tasks of the development and successful operation of the program, as assigned by the Dean of Education

• Continue to develop skills and knowledge pertinent to teaching and current marine industry practices

• Oversee and manage the activities of the Yacht Design Program Assistant

• Work cooperatively and professionally with the Dean of Education, staff, and students of the School at all times

Qualifications:

• Associates degree or higher

• Minimum of four years working in industry, in a Yacht Design or Naval Architecture role, with a proven track record in all aspects of small craft design and engineering

• Practical experience using, building or maintaining boats is a strong plus

• Previous teaching experience a plus

Contact:

Sean Fawcett, Dean of Education
seanfawcett@landingschool.edu
207-602-4816

www.landingschool.edu

Principal Designer / CAD Specialist: DLBA Naval Architects

Employer: DLBA Naval Architects 

Email Address: info@dlba-inc.com

Position Title: Principal Designer / CAD Specialist

Compensation/Rate: $75-85K 

Job Description: Summary of Responsibilities
As the team leader on a multidisciplinary team you will be responsible for developing functional 3-D CAD models, renderings and 2-D engineering drawings to support all conventional and novel aspects of marine vessel design. 

Essential responsibilities include but are not limited to:
• Prepare accurate and detailed designs, free form surface models and/or drawings based on concept sketches, photographs, or clearly stated functional requirements or appearances.
• Assisting naval architects and engineers in the design of boats and craft and providing solutions by adapting existing criteria or creating new techniques or procedures.
• Developing and maintaining computer aided design systems and processes regarding software tools and configuration to meet the demands of engineering products. 
• Coordinating efforts and experiences to recommend personnel and task estimates consistent with projects.
• Develop and maintain CAD Standards and Procedures in conjunction with other designers to improve product quality and efficiency.
• Identifies correct software and modelling tools and techniques for complex designs and provides guidance to other CAD team members. 
• Supports CAD team members in developing task time estimates for work completion. Provides mentorship and guidance to CAD team members to ensure agreed task targets are met.
• Identifies and organizes CAD training necessary to meet project development requirements.

Candidate / Position Requirements
• U.S. Citizenship
• Education: Post-high-school education in Computer Aided Design. Additional experience will be considered in lieu of Computer Aided Design education.
• 10(+) Years of experience developing 3-D designs and 2-D drawings to commercial standards including 
(5+) years of relevant design, testing, construction or operations/maintenance of small craft.
• Knowledge of basic mechanical principles and practice. 
• In-depth understand of a required form, function, or underlying design principles of a concept and the ability identify the critical design/geometry elements. 
• Demonstrated working knowledge of 3-D geometry, surface and solid modelling Computer Aided Design (CAD) Software such as Rhino, Inventor, Multisurf, Maxsurf, and/or Solidworks.
• Demonstrated experience conceptualizing and developing artistic renderings of boats and craft to commercial standard using Renderings applications such as Flamingo or VRay.
• Demonstrated success managing/leading/mentoring...
• Excellent Oral, Written and Presentation Skills.
• Strong Time Management and Organization Skills as an Independent Contributor. 
• Demonstrated Interpersonal Skills as a member of a Collaborative multidisciplinary team.
• Previous experience coordinating the work of designer drafts people.

General Position Requirements:
• Travel: Occasional travel may be required
• Working Conditions: Office environment with modern equipment. Ninety percent (90%) of time spent sitting. 

Company Summary
DLBA Naval Architects, formerly Donald L. Blount and Associates, a Division of Gibbs & Cox Maritime Solutions specializes in the design, development, construction of high performance yachts, custom sport fishing boats, production boats, commercial, military and law enforcement vessels.

Equal Opportunity Employer (EOE)
Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or veteran status. All qualified applicants are encouraged to

Port Engineer: Sea Education Association

Employer: Sea Education Association

Email Address: portengineersearch@sea.edu

Position Title: Port Engineer 

Compensation/Rate: TBD 

Job Description: Sea Education Association (SEA) invites applications for a full-time position of Port Engineer. SEA is a non-profit educational institution located in Falmouth, MA. We offer innovative and rigorous environmental studies programs on our campus and aboard our Sailing School Vessels, the Corwith Cramer and the Robert C. Seamans, in the waters of the Atlantic and Pacific oceans.
SEA is an Equal Opportunity Employer. SEA is committed to the development of a multicultural environment. We value input of multiple viewpoints and perspectives across the organization; our goal is to create an academic and working community that is rich with cultural, social and intellectual diversity.
Position Summary
The Port Engineer is a member of the Marine Operations Department responsible for coordinating and implementing overall engineering and safety management of SEA vessels under the direction of the Director of Marine Operations. 
S/he is responsible for facilitating technical and logistical support of engineering operations of SEA vessels and engineering staff. The Port Engineer leads efforts to plan the scope of projects and budget for each vessel’s yearly major yard maintenance periods.
Primary Responsibilities
• Coordinates and implements overall engineering management of vessels, especially with respect to US Coast Guard and ABS regulatory requirements. 

• Facilitates technical and logistical support of engineering operations and engineering personnel for two 134’ tall ships in remote locations. 

• Plans and manages the scope of projects and budget for each vessel during major yard maintenance periods each year.

• Trains and supervises activities of shipboard engineering personnel with respect to developing maintenance goals, modifications and/or repairs to shipboard systems, and inventory procurement.

• May serve as Chief Engineer onboard the vessels for approximately 6 to 12 weeks per year (including some yard periods).

• Works closely with Marine Operations staff, vessel captains and crew to effectively collaborate to best manage ABS, USCG, and IMO regulatory needs regarding vessel material condition and vessel systems.

• Works closely with Marine Operations staff, vessel captains and crew to assist with engineering preventative maintenance needs and troubleshooting support of shipboard systems and equipment such as shipboard scientific equipment, deck equipment and rigging, safety equipment, etc.

• Collaborates with Marine Operations staff and others to ensure timely planning and coordination of logistics for vessel arrivals and departures as well as other shipboard needs and activities.

Position Requirements
Minimum Qualifications
• Qualified applicants will have BA/BS in transportation, engineering, naval architecture or a science-related field or equivalent combination of experience and education and minimum 1 year of practical experience in shipboard work. 
• Minimum of 1 year of demonstrated management and project administration experience.
• Must have a passion for SEA’s mission with excellent communication, interpersonal and administrative skills. 
• Familiarity with Microsoft suite of programs (Word/Access/Excel) and a willingness to become familiar with other engineering programs.
• Familiar with research vessel or sailing school vessel operations.
• The ability to multi-task effectively, be flexible and innovative, and work non-traditional hours to support ships operating in remote locations.
• A demonstrated ability to establish and maintain positive relationships with colleagues, staff, students and outside agencies. 
• The ability to travel or go to sea for extended periods. The Port Engineer will have the opportunity to sail as Chief Engineer.

Preferred Qualifications
• A 200 Ton Near Coastal Mate license with sailing endorsement and/or AB Sail with relevant STCW certifications or willingness to obtain one. 
• Experience overseeing or managing staff and/or volunteers.
• Familiar with oceanographic sampling equipment.
• 2D CAD Experience a plus

Salary & Benefits
Salary commensurate with experience. Salary includes a competitive benefits package including Medical/Dental/Vision/Life insurances & retirement benefits. This position provides access to SEA sponsored trainings including but not limited to: Diversity training, Wilderness First Responder training, Leadership and Managerial Skills training, (STCW).
To Apply
A review of applications will commence on October 15th, 2019 and will continue until the position is filled. Applicants should submit electronic copies of a cover letter, current resume, and the names and contact information for 3 professional references. Email materials to PortEngineerSearch@sea.edu. Questions about this position may also be sent to this address.

About Sea Education Association 
SEA (www.sea.edu) is a global teaching, learning and research community dedicated to the exploration, understanding and stewardship of marine and maritime environments. SEA empowers students with life-changing sea voyages of scientific and cultural discovery, academic rigor and personal growth. Our SEA Semester program features an interdisciplinary curriculum and dynamic leadership-development experience—at sea aboard tall ships and on shore.

Marine Technician: True North Marine

Employer: True North Marine 

Email Address: info@truenorth-marine.com

Position Title: Marine Technician

Compensation/Rate: Hourly BOE 

Job Description: True North Marine is an industry-leading Full Service Shipyard, Yacht Brokerage, Marina and Dockside Service Company. We service both power and sail recreational vessels in the Clear Lake, Galveston, and surrounding areas of Texas where boating is a year-round adventure. Our market is considered the 3rd highest concentration of recreational vessels in the US, and is located just minutes from the Houston metropolitan area on Galveston Bay.

Our shipyard includes a 75 metric ton Marine Travel Lift, a haul out slip and in the water work slips. The work slips allow our technicians the ease to work on-site with full access to the service shop and parts department. The recently constructed marina has 36 covered boat slips designed for 25’-35’ fishing/sport vessels along with 80 dry storage spaces for trailer-able boats and an accessible boat ramp.

We provide mechanical, electrical, electronic, HVAC, plumbing, and other systems installation, repair, and preventive maintenance services, as well as numerous other Yacht Support Services through our unique Captain-Lite Yacht Management Program.

True North Marine is dedicated to the growth of our business as well as the growth of our employees. We value principled team members who are interested in continued growth opportunities. We offer excellent benefits and highly competitive pay. True North Marine realizes that the right people are integral to the success of our organization, and we heavily invest in both on-the-job and formal offsite training for our crew.
Applicants must have good communication skills, be able to utilize current mobile technology, and display a high level of professionalism and attention to detail in all they do. Strong logical troubleshooting skills are highly valued. The Marine Electronics/Electrical Technician will learn to perform repairs and installations of navigation, communication, satellite, audio visual, security related marine electronics products, and AC/DC electrical systems. Also required is the ability to design and network various systems, as well as work with customers to determine what products meet their needs. The ability to learn general installation and repair of other marine systems and equipment may be required as well.

We are seeking true professionals that take great pride in themselves and their work. True North Marine continues to offer industry-leading pay, competitive benefits, and career training paths for advancement to our valued employees.

• We offer competitive pay reflective of skill and experience level
• Company pays 100% of employee health insurance monthly premium
• Company pays 50% of Dental/Vision monthly premium
• 401K
• PTO (paid time off, including vacation, sick leave and bereavement)
• Paid holidays
• Relocation/Retention bonus
• For the right individuals, excellent opportunity for growth within the company

If you feel you may be a good fit and are open to new challenges and rewards, apply with us today!
Submit resume to: info@truenorth-marine.com

Marine Technician - Electronics and Electrical: Marine Technical Services

Employer: Marine Technical Services

Email Address: job@goMTS.net

Position Title: Marine Technician - Electronics and Electrical

Compensation/Rate: Negotiable 

Job Description: Regional leader in Marine Electronics and Electrical Systems seeks applicant to join our team of highly experienced technicians and installers. A veteran technician with direct and specific experience and references in this trade including certifications such as NMEA, ABYC, or electronics manufacturer certifications would be the ideal candidate. If you are this type of experienced applicant we can offer pay and benefits exceeding what you are making now. A signing bonus and moving allowance is also a possibility to motivate an experienced technician to join our team.

Any candidate with marine service work or systems installation experience could also be a strong applicant as we can train the specific electronics/electrical technical skills. Recent trade school graduates or career changers may be considered as well but will start at a level commensurate with experience.
Our company will invest in the right candidate with above average wages, benefits, a company van, specialized tools and equipment as needed, company apparel, helper and administrative support as necessary, industry training/certifications, manufacturer training and certifications, and whatever else it takes to put the absolute best technician possible on each and every project. The position is full-time, year round, with allowance for medical benefits, 401(k), paid holidays, paid vacation, etc. We generally work 7:30am to 4:00pm M-F and take the weekends off. We have a brand new shop with a custom designed floor plan and resources specifically built for this business. The shop is located at the Herrington Harbour North Marina, one of the largest and most prosperous marinas on the Chesapeake Bay. We always have work to do so we have never laid off an employee.

We are a full service contractor offering sales, installation, service, design, consultation, and training on all major brands of marine electronics and electrical systems. Our team is a tight knit group of like-minded individuals with great pride in producing high quality results while respecting the boats we work on and the appearance and manner in which we conduct our business. Our workplace is a positive environment where we enjoy each other's company and what we do. There are no workplace politics or drama. We enjoy an impeccable reputation in the area for conducting business in a manner far above most marine contractors. A new hire will have to fit in with our company mindset and culture regardless of technical skills and experience.

Technician work highlights:
• Install GPS, chartplotters, fishfinders, radar, autopilots, VHF radios, stereos, satellite communication systems, A/V systems
• Brands include, but not limited to, Garmin, Furuno, Raymarine, Simrad, Lowrance, KVH, Intellian, Icom, Mastervolt, Victron, FLIR, Fusion and more
• Troubleshoot and repair same
• Powerboats and Sailboats, mostly private recreational but some commercial - Small trailer boats up to complete electronics and entertainment systems on multi-million dollar new custom yachts
• AC and DC electrical wiring
• AC and DC panels, systems, troubleshooting/repair - Install/service/troubleshoot batteries, chargers, inverters
• Bench work/soldering/component assembly
• Transducer installation/service
• PC Navigation systems installation/service
• NMEA 0183/2000 wiring
• Light fabrication/woodworking/fiberglass/paint as necessary to fit electronics
• Aloft work on electronics and lights
• Battery replacements and other heavy lifting tasks
• Seatrials for equipment calibration and testing
• Customer training/orientation
• System design and documentation (schematic drawings)

If you have relevant experience and want to be on a winning team we would like to hear from you.


Marine Technical Services, 410-867-0676, job@goMTS.net

Boat Builder: Duffie Boatworks LLC

Employer: Duffie Boatworks LLC

Email Address: Jon@Duffieboatworks.com

Position Title: Boat builder

Compensation/Rate: $20-$35/hr commensurate with experience

Job Description: Duffie Boatworks an upstart custom boat builder and marine service provider is looking for an experienced boat builder or marine craftsman that wants to join our team of passionate individuals.

Duties include but are not limited to carpentry with different cores and plywood and hardwoods such as Fir, Mahogany and Teak. The applicant should be comfortable with fiberglass layup, repair, filling, fairing, paint application and repair. New construction and repairs are conducted on boats of all sizes up to 80 ft.

An apprentice tech position is available to a qualified applicant willing to learn a trade, and who has related experience. Salary is commensurate with experience. Qualified applicants can reply to this posting with a resume.