Electrical tech for Airstream project- Kennebunk

Employer: Albert Kolff

Email Address: Kolff@sbcglobal.net

Position Title: Electrical tech

Compensation/Rate: TBD

Location: Kennebunk, ME

Position Summary:

We need an electrician with 12Vdc/120Vac Converter and Inverter knowledge, for Resto-Modification of a 1958 Flying Cloud Airstream (Land Yacht).

This is a job offer to provide the final electrical wiring of the DC and AC power for our 20 ft Airstream.

We have installed the 12 V dc and 120 V ac home runs to a Power Converter/Distribution Panel (not wired) and will need to define the requirements to select and install an Inverter and Lithium-Ion batteries to provide 120 V ac when off the grid.

I look forward to finding a graduate to assist us in wiring this Airstream project.

Repair person- ME

Employer: David Virtue

Email Address: david@davidvirtue.com

Website: https://www.woodenboat.com/boats-for-sale/aura-iii-1986-custom-built-covey-island-38-pilothouse-yawl

Position Title: Repair person

Compensation/Rate: TBD

Location: Kittery Point, ME

Position Summary:

I have a 38' Covey Island pilothouse yawl, AURA III, built in 1986, that needs work on the hull, topside and below the waterline. Specifically, there are a number of small and larger areas where the fiberglass has separated from the strip-planked hull. Mostly removing the glass the end of this summer/fall to allow the wood to dry and repairing the areas in the spring. All the wood should be intact. Also a hull paint job in the spring, using enamel and roll and tip technique. AURA will be inside in a well lit but unheated building. You can see her in the WoodenBoat classifieds. Right now she is on her mooring in Kittery Point,

207.408.8384

Marine Electronics Technician - General Installer in RI

Employer: Bluewater Technologies, Inc

Email Address: admin@bluewater-tech.net

Position Title: Marine Electronics Technician - General Installer

Compensation/Rate: $20-$30

Location: Newport, RI

Position Summary:

General Electronics Technician
Required Skills: Entry Level position in which we will provide in-field training to gain experience with the following skill set to include electronics, networking, communications, a/v, computer systems.

Description: Applicant must be able to work independently under the supervision of a lead technician on service and installation jobs, as well as be part of a team installer group. Skill set should include basic electronics, networking, communications, Audio/Visual, and computer systems. Have good customer service skills and logical troubleshooting capabilities are a must. This is an hourly full-time year-round position installing new marine electronic packages and servicing of existing systems.

Technician would be expected to install the following electronics: AIS, GPS, Chartplotter, Radar, VHF, Fish Finders, Security and Monitoring Systems; but not limited to. Have the knowledge to properly install AC and DC electrical wiring, panels, systems and troubleshooting and resolving electrical issues involving the electronic packages. Also, a successful candidate will have the knowledge base and experience of installing NMEA 0183 & N2K systems. We are known for our audio/visual and onboard communication and networking solutions; so, knowledge of audio-visual design and installation is desired. We are happy to train and expand technician skill set for the right candidates.

Our company focuses on the private yacht market extending to all recreational boaters. We are a full-service company which offers consulting, design, sales, installation, service and training of all major brands of marine electronics. We continue to win challenging contracts by offering custom and cost-effective solutions to all our new and existing clients. We operate our business primarily in South Florida and Newport, Rhode Island. Please send resumes only - no phone calls. Bluewater Technologies, Inc. email resumes to admin@bluewater-tech.net.

Mechanical/Systems Tech Wanted- ME

Employer: Artisan Boatworks

Email Address: alec@artisanboatworks.com

Website: http://artisanboatworks.com

Position Title: Mechanical/Systems

Compensation/Rate: Competitive wages, depending on experience

Location: Rockport, ME

Position Summary:

Artisan Boatworks in Rockport, Maine is looking for talented and motivated individuals to join our vibrant team of accomplished boatbuilding, restoration, and maintenance professionals. For two decades, our dedicated crew has built more licensed replicas of Herreshoff designs than any boat builder since HMCo closed its doors in 1944.

As an integral member of our team, you’ll be working with some of the best in the industry. Enjoy consistent and rewarding projects, a flexible family-friendly work schedule, excellent competitive compensation, and full benefits.

Benefits Include:

– Fun, friendly, and professional work environment
– Excellent project management
– State of the art tools and facility
– Consistent and rewarding projects
– Flexible family friendly work schedule
– Excellent pay, holidays, and vacation
– Health insurance and retirement plan
– 2-week summer break

Painters/Varnishers Wanted- ME

Employer: Artisan Boatworks

Email Address: alec@artisanboatworks.com

Website: http://artisanboatworks.com

Position Title: Painters/Varnishers

Compensation/Rate: Competitive wages, depending on experience

Location: Rockport, ME

Position Summary:

Artisan Boatworks in Rockport, Maine is looking for talented and motivated individuals to join our vibrant team of accomplished boatbuilding, restoration, and maintenance professionals. For two decades, our dedicated crew has built more licensed replicas of Herreshoff designs than any boat builder since HMCo closed its doors in 1944.

As an integral member of our team, you’ll be working with some of the best in the industry. Enjoy consistent and rewarding projects, a flexible family-friendly work schedule, excellent competitive compensation, and full benefits.

Benefits Include:

– Fun, friendly, and professional work environment
– Excellent project management
– State of the art tools and facility
– Consistent and rewarding projects
– Flexible family friendly work schedule
– Excellent pay, holidays, and vacation
– Health insurance and retirement plan
– 2-week summer break

Boatbuilder Wanted- ME

Employer: Artisan Boatworks

Email Address: alec@artisanboatworks.com

Website: http://artisanboatworks.com

Position Title: Boatbuilder

Compensation/Rate: Competitive wages, depending on experience

Location: Rockport, ME

Position Summary:

Artisan Boatworks in Rockport, Maine is looking for talented and motivated individuals to join our vibrant team of accomplished boatbuilding, restoration, and maintenance professionals. For two decades, our dedicated crew has built more licensed replicas of Herreshoff designs than any boat builder since HMCo closed its doors in 1944.

As an integral member of our team, you’ll be working with some of the best in the industry. Enjoy consistent and rewarding projects, a flexible family-friendly work schedule, excellent competitive compensation, and full benefits.

Benefits Include:

– Fun, friendly, and professional work environment
– Excellent project management
– State of the art tools and facility
– Consistent and rewarding projects
– Flexible family friendly work schedule
– Excellent pay, holidays, and vacation
– Health insurance and retirement plan
– 2-week summer break

Marine Service Technician- MD

Employer: Pocket Yacht Company

Email Address: service@pocket-yacht.com

Website: http://www.pocketyachtco.com/

Position Title: Marine Service Technician

Compensation/Rate: $20 - $26 per hour

Location: Chester, MD

Position Summary:

The Pocket Yacht Company is now seeking a full-time Marine Service Technician to join our growing team. This qualified individual must be able to problem-solve, work well in a team environment, and be efficient to achieve high customer satisfaction.


Responsibilities include:

Service boats to a high standard.
Properly diagnose and repair boats brought in for warranty or service.
Able to perform routine service inspections on inboard and outboard engines.
Troubleshoot, repair, and install electronics in boats.
Ability to winterize boats.
Work under the direction of the Service Manager to complete work in a timely manner.
Maintain knowledge of marine technology. Has or is willing to acquire Yamaha and Volvo Penta certification.
Ensure all tools and equipment are maintained and in good working condition and maintain a clean workplace.
Ability to transport trailers and boats to satellite offices.
Experience with Fiberglass and Gelcoat repairs is a plus.


Requirements:

Work well in a team environment with a positive attitude.
Knowledge of boats, marine engines, repairs, and maintenance.
High school diploma or equivalent. College or trade school degree preferred
Maintain a professional appearance
Ability to communicate at a high level, both verbally and in writing
Be team-oriented, self-motivated, and process-driven
Have a valid state driver’s license
Ability to pass a pre-employment background/drug screening
Prior experience in the marine industry is preferred.
Ability to Trailer & Drive Boats
Benefits

Two weeks of paid Vacation
Five paid Holidays
Three days sick leave
401K with matching company contributions after one year of employment.
Performance bonuses and incentives
Job Type: Full-time

Drafter- WA

Employer: ACI Boats

Email Address: jobs@aciboats.com

Website: http://aciboats.com

Position Title: Drafter

Compensation/Rate: DOE

Location: Port Townsend, WA

Position Summary:

The engineering team provides design expertise and support in a fast paced, Aluminum boat manufacturing work environment.

JOB TASKS
• Ability to use Rhino, Autocad, Solidworks and Fusion 360 to produce 2D and 3D drawings
• Assist with CnC cutfiles, machine operations and safety
• Create, modify proposal drawings, Layout dimensions, 3D modeling and Renderings
• Familiarity with welding and fabrication processes: Aluminum welding, Sheetmetal forming, Sheet metal cut with a CNC router
• Ensure non-conformance is logged throughout the build, and apply to future builds
• Evaluate and improve on shop processes & procedures with construction standards and templates

PHYSICAL REQUIREMENTS
• Ability to work up to 8 hrs per day on a computer
• Walking, kneeling, crouching or crawling for long periods in a variety of environments
• Capable of lifting up to 30 lbs without assistance

WORK ENVIRONMENT
Work is performed in a boat yard, which can subject workers to loud levels of noise, fumes, debris, tripping hazards and sharp metal edges. Personal protective equipment will be provided to staff, but personnel are responsible for ensuring that the equipment is properly used and for being aware of their surroundings.

BENEFITS
• Premara Health insurance, vision and dental
• PTO, Sick Leave and Paid Holidays
• Paid Professional Development

Composites Technician, Painter, & Welder Fabricator- RI, NV & NC

Employer: Symmetrix Composite Tooling

Email Address: tripp@symmetrixcomposites.com

Website: http://www.symmetrixcomposites.com

Position Title: 3 Positions Available; Composites Technician, Painter, Welder Fabricator

Compensation/Rate: Per Experience

Location: Bristol, RI - Minden, NV - Statesville, NC

Position Summary:

Job Description: Composite Technician
The successful applicant should have basic work skills in a composite manufacturing environment, with experience in several of the following skill-sets;
Hand lay-up laminating with polyester, vinylester and epoxy resins
Vacuum bagging and resin infusion
Patching and repairing gel coat
Sanding and fairing
Buffing and polishing
Prep and painting (spraying experience a plus, not required)
Strong attention to detail
Hand tools proficiency
Execute verbal and written instructions
Reliable, motivated team player
Locations: Nevada, Rhode Island, North Carolina
Categories: Composite Technician
Job Types: Full Time
Availability: Immediate

Multiple positions -SC

Employer: Riddle Boatworks

Email Address: john@riddleboatworks.net

Website: http://www.riddleboatworks.net

Position Title: Multiple positions - see below

Compensation/Rate: See job description below

Location: Johns Island, SC

Position Summary:

At Riddle Boatworks, we have been building, restoring, and repairing wooden boats of all types since 1980. Working in both wood composite and traditional plank-on-frame construction techniques, we take on a variety of work from vintage boat restoration, to 70’ cold-molded sportfishermen repairs, to custom refits, to new construction. Every project is unique and the work never gets old!

I recently relocated here to the Charleston area from out-of-state and am seeking to establish a small crew of versatile craftsmen starting with:

CARPENTER: I am seeking a talented, versatile person capable of working to a high standard in all aspects of marine woodworking in both traditional and modern wood composite techniques. You will also participate in the various sanding, fairing, and coating operations in preparation for finish work. It won’t hurt if you have an aptitude with a varnish brush too. Attention to detail at every stage is required and any additional skills you can contribute will only enhance your standing.

And…

FINISHER: Almost every project involves a considerable amount of finish work from brush-applied paints and varnishes to spray-applied AwlGrip and other similar coatings. Filling, fairing, filleting and epoxy coating are often part of the project along with all the related sanding all those processes entail. I am seeking a detail-oriented person who enjoys those tasks and can eventually, if not immediately, work into a lead position in handling our finish work.

Applicants for either position must be willing to accept training or other direction if necessary to ensure your techniques meet our standards. Position is full-time with compensation starting at $25 or more, depending on experience, with my commitment for rapid increase following your proven performance.

If you’re suited to one of these positions, please email to tell me about yourself and why you believe you would make a good fit in my shop. Include your resume if you have one. I look forward to hearing from you!

Multiple Jobs in MAINE: General Labor, Systems Technician, Outboard Tech, Diesel Mechanic

Employer: Padebco Full-Service Boatyard & Custom Boat Builders

Email Address: padebco@gmail.com

Website: http://www.Padebco.com

Position Title: Multiple Jobs in MAINE: General Labor, Systems Technician, Outboard Tech, Diesel Mechanic

Compensation/Rate: Based on experience

Location: Round Pond, ME

Position Summary:

Padebco has multiple year-round, full-time positions available at our full-service facility. We offer dental & vision insurance, a retirement plan with company match, paid time off, and paid holidays.

Pay rate is based on experience. ABYC and other certifications are a plus.

Available Positions:
-Outboard Technician
-Diesel Engine Technician
-Systems Technician
-General Yard Laborer

About Us: Padebco is located in Round Pond on the Pemaquid Peninsula in Maine. We have been building and servicing boats in Maine’s Mid-Coast for over 65-years. Padebco is a full-service boatyard offering a wide range of marine services; repowers, refits, storage, and more! We are a custom boat builder of traditional Downeast-style fiberglass recreational boats that lean toward luxury. Our boats range from 21 – 32-foot cruisers, center consoles, and walkarounds. Our team has earned a solid reputation for excellence by providing quality workmanship, top-notch service, and attention to detail for all of the boats we build and all of the boats in our care.

Multiple Positions Wanted- NJ

Employer: Release Boatworks

Email Address: lacey@releaseboatworks.com

Website: https://www.releaseboatworks.com/careers/

Position Title: Multiple Positions, see below

Compensation/Rate: Competitive/Full Time

Location: Egg Harbor City, NY

Position Summary:

Now Hiring in New Jersey! Make competitive pay and benefits building boats for Release Boatworks. No experience necessary, only a willing and able, hard-working mindset.

Current positions available include:
Purchasing Manager
Tooling/plug maker
Patchers
Mechanics
Laminators
Electricians
Lead boat building positions available depending on experience.

Call 833-347-4729 or email jobs@releaseboatworks.com for more details.

We will train, and we offer: a competitive salary, full benefits, 401k, and much more.

Are you currently working in the boat building industry? Be sure to ask about our signing bonus, “instant raise program”, and other merit benefits!

Boatbuilder Wanted- Midcoast Maine

Employer: Riverside Boat Company

Email Address: natandpromis@gmail.com

Position Title: Boatbuilder

Compensation/Rate: $16/hr. - $20/hr. DOE

Location: Newcastle, ME

Position Summary:

We are a small wooden boatyard in midcoast Maine, annually maintaining 50 boats up to 40', while repairing, restoring, and occasionally building new ones as well. We are looking to hire a full time boatbuilder who would be an integral part of our crew, repairing, maintaining, winterizing, moving, hauling, and launching all the boats in our yard. Mechanical skills are a plus, but not required. If this is of interest, please call (603-244-0948) or email (natandpromis@gmail.com) Nat to set up an interview. Thank you for your consideration.

Fiberglass Lamination Technician- Maine

Employer: Bristol Marine

Email Address: zach@bristolmarine.com

Website: http://www.bristolmarine.com

Position Title: Fiberglass Lamination Technician

Compensation/Rate: Wages based on experience. Starting at $24/hr.

Location: Southport, ME

Position Summary:

We are looking for a full time lamination technician to join the Bristol Marine team at our Southport Island facility in Southport Maine. Knowledgeable in composite manufacturing including: patch/repairs, gelcoat application, Awlgrip application, light carpentry skills a plus for small part mold construction. This position does not require prior work experience.

Every Bristol Marine employee is eligible for a comprehensive benefits package which includes, full health coverage with deductible paid by employer, company matched retirement accounts, and paid time off. We are seeking committed individuals who seek to grow their careers with an employee centric company aiming to expand.

Marine Systems Technician- Maine

Employer: Bristol Marine

Email Address: zach@bristolmarine.com

Website: http://www.bristolmarine.com

Position Title: Marine Systems Technician

Compensation/Rate: Wages based on experience. Starting at $24/hr.

Location: Southport, ME

Position Summary:

We are looking for a full time marine systems / electronics technician to join the Bristol Marine team at our Southport Island facility in Southport Maine. Knowledgeable in boat systems including: diagnostics, installation of pumps, lighting, wiring & outboards, ABYC certified preferred. This position does not require prior work experience.

Every Bristol Marine employee is eligible for a comprehensive benefits package which includes, full health coverage with deductible paid by employer, company matched retirement accounts, and paid time off. We are seeking committed individuals who seek to grow their careers with an employee centric company aiming to expand.

Composites/Rigging assembly- Texas

Employer: NewWater BoatWorks

Email Address: tlclancey@aol.com

Website: http://www.newwaterboatworks.com

Position Title: Composites/Rigging assembly

Compensation/Rate: Based on experience

Location: Elmendorf, TX

Position Summary:

NEWWATER BOATWORKS, TEXAS PREMIERE SHALLOW WATER BOAT BUILDER HAS MULTIPLE OPENINGS.

IF YOU ARE INTERESTED IN A CAREER IN:
*ALUMINUM FABRICATION
*BOAT BUILDING (ASSEMBLY/RIGGING)
*FIBERGLASS
*CANVAS/UPHOLSTERY FABRICATION
PLEASE FEEL FREE TO CONTACT US AND SET UP AN INTERVIEW. THESE POSITIONS ARE FOR IMMEDIATE HIRE. WE OFFER A GREAT WORKING ENVIRONMENT WITH COMPETITIVE PAY. FULL TIME EMPLOYEES WILL RECEIVE PAID VACATION, PAID SICK LEAVE, PAID HOLIDAYS, AND EMPLOYER COMPENSATED HEALTH/DENTAL/VISION INSURANCE.
HOURS MONDAY – FRIDAY/8:30 A.M. – 5:30 P.M. PLEASE CONTACT US AT (210)648-2206. WE ARE LOCATED AT 13406 DONOP ROAD, ELMENDORF, TEXAS, 78112.

Inside Machinist- New York

Employer: Derecktor Shipyard

Email Address: kwear@derecktor.com

Website: http://michaelrybovichandsons.com

Position Title: Inside Machinist

Compensation/Rate: $25 - $40 per hour

Location: Mamaroneck, NY

Position Summary:

Derecktor Shipyard is hiring an experienced Inside Machinist to work in a marine environment at our Mamaroneck, NY location. Candidates must have experience operating both manual machines and CNC.

Responsibilities:
Fabricate, modify and remanufacture parts required to maintain, repair and/or create ship board parts and equipment.
Set up machines, adjust settings, perform calibration, maintenance and repairs.
Apply knowledge of mechanics, shop mathematics, machinability of materials, layout, and machining
Ability to operate lathes, milling machines, planer, drill presses, and grinder, etc.
Operate computer controlled and manual machine shop equipment
Design and implement CAD drawings for machining of parts
Interpret mechanical drawings/blueprints, design and implement CAD drawings for machining of parts
Perform machine maintenance


Requirements:
Able to perform duties with minimal supervision
Keeps work area clean and organized to insure safety and environmental compliance.
Prefer three years of hands on experience operating typical machine shop equipment
Must be vaccinated

Benefits:
Benefits include paid holidays, paid vacation, health benefits, 401K with company match and company sponsored insurance.

Work Environment Summary:
Applicant may be subject to environmental conditions such as cold, heat, exposed to noise, hazards, and confined spaces/close quarters. Applicant must be aware of work environment at all times.

Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to lift, stand, walk, kneel, crouch, stoop, use hands and fingers, handle tools, or controls, and talk or hear others. The employee must regularly lift and/or move up to 50 pounds, climb ladders, travel to/from and in/out of vessels, and take field measurements.

Shift hours are 6:30am - 3:00pm.

Marine Pipefitter- New York

Employer: Derecktor Shipyard

Email Address: kwear@derecktor.com

Website: http://michaelrybovichandsons.com

Position Title: Marine Pipefitter

Compensation/Rate: $25 - $35 per hour

Location: Mamaroneck, NY

Position Summary:

We are looking for a reliable pipe fitter to plan, install and maintain piping systems in commercial and private boats. The pipe fitter will be responsible for reviewing blueprints, planning, installing, and maintaining piping systems and related equipment. experience in welding and installing pipe systems according to specifications, excellent mechanical skills and a good understanding of the requirements and precautions necessary for working with pipes conveying all kinds of liquids.

Duties:

Inspecting the workplace, clearing obstructions and preparing materials and equipment.
Studying blueprints and planning pipe systems and related equipment installations.
Using a variety of tools to modify pipes to specifications.
Measuring and marking pipes for cutting and threading.
Assembling and welding pipe components and systems.
Securing pipes to walls and fixtures with brackets, clamps, and welding equipment.
Ordering required materials such as pipes, hangars, brackets, hydraulic cylinders, etc.
Repairing and maintaining pipe systems, supports, and related equipment.
Clearing pipe systems of obstructions and testing their functionality.
Complying with relevant codes and regulatory standards.

Requirements:
Must be vaccinated against COVID-19.
Trade school education or apprenticeship.
Excellent mechanical and troubleshooting skills.
Ability to prioritize and maintain strong attention to detail.
Good communication skills.
Physical dexterity.

Work Environment Summary:
Applicant may be subject to environmental conditions such as cold, heat, exposure to noise, hazards, and confined spaces/close quarters. Applicant must be aware of work environment at all times.

Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to lift, stand, walk, kneel, crouch, stoop, use hands and fingers, handle tools or controls, and talk and hear others. The employee must regularly lift and/or move up to 50 pounds.

Benefits:
Benefits include paid holidays, paid vacation, health benefits, 401K with company match and company sponsored insurance, such as life insurance.

EEO Statement:

Derecktor is an equal opportunity employer. All applicants will be provided equal consideration without regard to race, color, religion, national origin, age, genetic information, military status, gender, sexual orientation, gender identity or expression, disability, or protected veteran status in accordance with applicable federal, state and local laws.

Job Type: Full-time

Shift hours are 6:30am - 3:00pm.